VoIP Entry Phone Mounts

- Self diagnostic reports via email (testing com mic speaker & switch)
- Automatic polling and programming software included
- 2 Amp relay contacts for door/gate or SL-2 strobe light control
- Blue ﾓCall Connectedﾔ LED indicator (E-30/E-32-IP only)
- SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
- PoE powered (class 1 <4 watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP eliminates the need for ﾓPush to Talkﾔ mode
- Network downloadable firmware
- T-10 Torx security screws for added security
- Handsfree operation
- Marine grade 316 stainless steel prevents corrosion on the stainless steel models
- Laser etched graphics on stainless steel models
- Programmable to dial up to 5 numbers on busy or ring no answer
- Cycles through backup phone numbers on busy or no-answer
- Optional Enhanced Weather Protection (EWP) EWP products are designed to meet IP66 Ingress Protection Rating see DOD# 859
- Hangs up on busy signal time-out or touch tone command
- Remotely programmable
- Extended temperature range (-40ﾰF to 140ﾰF)
- 3 different chassis or board only available
- Volume adjustments for microphone and speaker
- E-10-IP and E-30-IP are flush mountable using the included rough-in box or can be surface mounted using an optional VE-5x5 Surface Mount Box (DOD# 424)
- E-32-IP flush mounts in a standard double gang electrical box (not included) or can be surface mounted using an optional VE-5x5 Surface Mount Box (DOD# 424)